Set Password; Lock Instrument; Lock/Unlock And Local/Remote Operation - Thermo Scientific 42i Instruction Manual

Set Password

Lock Instrument

Lock/Unlock and
Local/Remote Operation
Thermo Fisher Scientific
The Set Password screen is used to set the password that is used to unlock
the front panel, and is shown if the instrument is unlocked and the
password is not set.
In the Main Menu, choose Password > Set Password
●
ENTER NEW PASSWORD:
ABCDEFGHIJKLMN
OPQRSTUVWXYZ
0123456789 ./-
RANGE AVG
The Lock Instrument screen is used to lock the instrument's front panel so
users cannot change any settings from the front panel. The lock instrument
screen is shown if the instrument is unlocked and the password is set.
In the Main Menu, choose Password > Lock Instrument
●
LOCK FRONT PANEL:
XXXPRESSING ENTER
PREVENT USER FROM CHANGING
XCONFIG FROM FRONT

LOCK AND RETURN TO RUN
RANGE AVG
If the instrument is locked via the front panel using Password > Lock
Instrument, the instrument reports being in Remote mode. In this mode,
the front panel is "locked", where data can be viewed, settings can be
viewed but not changed using the front panel interface, and the remote
"Set" commands are active.
If the instrument keyboard is unlocked via the front panel using Password
> Unlock Instrument, the instrument reports being in Local mode, the
front panel interface is unlocked, and settings can be changed from the
front panel.
Refer to "C-Link Protocol
about "mode", "allow mode", and "power up mode" commands.
RANGXXXXXE
BKSP
PAGE
SAVE
DIAGS ALARM
WILLXXXX
PANELXX
DIAGS ALARM
Commands" appendix for detailed information
Operation
Password Menu
Model 42i Instruction Manual 3-93