Table B-12. Set Layout Ack Values - Thermo Scientific 42i Instruction Manual

I/O Configuration
Thermo Fisher Scientific
Send: program no
Receive: program no iSeries 42i 01.00.01.074
set layout ack
This command reports the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, according to
reports that the instrument is configured to do nothing.
Send: layout ack
Receive: layout ack 0
set layout ack value
This command disables the stale layout/layout change indicator (*) that is
attached to each response if the erec layout has changed since the last time
erec layout was requested, according to
Send: set layout ack
Receive: set layout ack ok
Table B–12. Set Layout Ack Values
Function
Value
0 Do nothing (default)
1 Append "*"
tz
This command reports the "tz" timezone string for the NTP server. See
"Network Time Protocol Server" in the "Communications Settings"
section of the "Operation" chapter for more information.
Send: tz
Receive: tz EST+5EDT
set tz string
This command sets the timezone string for the instrument for use with the
NTP server, where string is a standard timezone string. Common strings are
listed in the "Timezone" screen description in Chapter 3.
Send: set tz EST+5EDT
Receive: set tz EST+5EDT ok
analog iout range channel
This command reports the analog current output range setting for channels,
where channel must be between 1 and 6, inclusive. The example below
reports current output channel 4 to the 4-20 mA range, according to
C-Link Protocol Commands
Table B–12. The following example
Table B–12.
Model 42i Instruction Manual
I/O Configuration
Table
B-49