Table of Contents
Advertisement
Clutch Lever
A span adjuster is installed to the clutch
lever. The adjuster allows the distance
from the handlebar to the lever to be
changed to suit the span of the rider's
hands.
1
1.
Span adjuster
2.
Clutch lever
To adjust the clutch lever span:
Rotate
the
▼
counterclockwise
the distance to the handlebar or
clockwise to increase the distance
from the handlebar.
The distance from the handlebar
▼
grip to the released lever is shortest
when the adjuster wheel is adjusted
fully counterclockwise.
2
span
adjuster
to
decrease
GENERAL INFORMATION
Throttle Control
Warning
Always be alert for changes in the
'feel' of the throttle control and have
the throttle system checked by an
authorized
Triumph
changes are detected.
Changes can be due to wear in the
mechanism, which could lead to a
sticking throttle control.
A sticking or stuck throttle control will
lead to loss of motorcycle control and
an accident.
The
motorcycle
throttle twist grip to open and close
the throttles. There are no direct-
acting cables in the system and no
adjustments can be made.
Check that the throttle opens smoothly,
without undue force and that it closes
without sticking.
If there is a malfunction with the
throttle
control
Indicator
Light
illuminated and one of the following
engine conditions may occur:
MIL illuminated, restricted engine
▼
RPM and throttle movement
MIL illuminated, limp-home mode
▼
with the engine at a fast idle
condition only
MIL illuminated, engine will not start.
▼
For all of the conditions mentioned
contact an authorized Triumph dealer
as soon as possible to have the fault
checked and rectified.
dealer
if
any
has
an
electronic
the
Malfunction
(MIL)
becomes
65
Advertisement
Chapters
Table of Contents
