Network - EverFocus VANGUARD 16x8 User Manual

4.1.1.4 Network

4.1.1.4.1 Network
You can configure the network settings on this page.
PPPoE: This is a DSL-connection application. The ISP will ask the user to input a username
and password. Contact your ISP for these details.
Note: If PPPoE is selected as the IP type, the supplied IP Utility program will not be able to
detect the device.
DHCP: DHCP server in LAN will automatically assign an IP configuration for the network
connection. This setting lets the system use an automatically assigned (dynamic) IP address.
This address can change under certain circumstances, for instance, when the DVR's network
switch/hub has to be rebooted.
Static IP: Users can manually set up a Static IP address for the DVR. This type of address is
stable and cannot change, but users have to make sure there are no IP address conflicts with
other network-connected devices.
Client Port: Keep 9000 port. Change only when necessary.
HTTP Port: Keep 80 port. Change only when necessary.
UPnP: If you want to enable the UPnP function, click Enable from the drop-down list.
Click Default to return to factory default value, Save to save the settings, or Cancel to cancel
and leave the page.
VANGUARD 16x8 / VANGUARD 8x4 / VANGUARD 4x2
43