Privacy Mask - EverFocus H.265 VANGUARD II Series User Manual

4.1.5

Privacy Mask

This function is only available for analog cameras. The Privacy Mask can block out sensitive
areas from view. This feature is useful when users don't want the sensitive information visible.
Up to four Privacy Masks can be configured.
To configure privacy masks:
1. Select a channel from the Channel drop-down list.
2. Select Enable Privacy Mask to enable the function.
3. Select the areas (masks) to be configured. The selected areas will be displayed on the
preview image. Up to 4 areas are available.
4. To resize the area, click and drag the bottom-right corner of the rectangle to resize. To drag
an area to another location, click and drag the number to relocate the area.
Click and drag to resize
5. Click the Apply button to save the settings.
Copy: You can apply the same configurations from one channel to other channels. Select a
channel from the Source Channel drop-down list and then select the parameters you would
like to apply to other channels. Select the desired channels from the Target Channel field and
then click the Copy button.
Default: Click to apply the default setting.
Apply: Click to save the settings.
Click and drag to relocate
37
H.265 VANGUARD II Series