Hard Disk Compatibility List; Basic Connection - EverFocus IRONGUARD II 16 POE Quick Installation Manual

2.2 Hard Disk Compatibility List

Please go to the product page (Download) on EverFocus' Website
the latest Storage Compatibility List. It's recommended to use the hard disk models listed on the
Storage Compatibility List to ensure your hard disks are compatible.
Note: If using two hard disks, it's recommended to choose the hard disks with the same
capacity.

3. Basic Connection

3.5" HDD
1
3
Line Level
Audio Out
1. To record videos, install 3.5" HDD(s) to the NVR. Please refer to 2.1 Hard Disk Installation.
2. Connect microphones to the audio input ports to transmit audio from the NVR to the remote
sites (Web browser of NVR, eFVMS App or EverFocus CMS). Note that the microphones with
a (built-in) amplifier and external power supply are required.
3. To listen to the audio from IP cameras or remote sites, connect speakers to the audio output.
Note that the speakers with a (built-in) amplifier and external power supply are required.
4. To view videos at local site, connect a monitor to the HDMI or VGA port using the HDMI or
VGA cable supplied by the monitor manufacturer.
5. Optionally connect a mouse to the NVR to control the system. You can also control the
system using the supplied IR Remote Control.
6. To connect to the IP cameras, connect the cameras to the LAN (PoE) ports.
7. Use a standard RJ-45 CAT5 Ethernet cable to connect the NVR to the network.
8. Use the supplied Power Cord to connect the NVR to the power outlet.
Line Level
Mouse / USB Storage
Audio Input
2
4
Main Monitor
Main Monitor
(VGA)
5
IP Cameras
4
(HDMI)
Web Remote
Client
4
www.everfocus.com.tw
6
7
Network
IP Cameras
EverFocus CMS
to see
8
Power Supply