Email - EverFocus PARAGON FHD 16x4 User Manual

PARAGON FHD 16x4
6.7.2

Email

You can configure the Email settings for DVR to send Email alert when an event occurs.
SMTP Server: Assign the SMTP (e-mail) server's name. Note that for more reliable email
service, use the server's IP address.
SMTP Port: Assign the port number used by the SMTP server.
Authentication: Check this box if the SMTP server requires authentication (user name /
password).
SSL: Check the box if mail server needs communication to be encrypted by SSL.
User Name: Input the login user name if the SMTP server requires authentication.
Password: Input the password if the SMTP server requires authentication.
Confirm: Input the password again to confirm the password.
Sender Email: Input the e-mail address of the sender (the DVR). Sender's e-mail address has
to match the user name and password above.
Receiver Email 1: Input the first e-mail address that event messages are sent to.
Receiver Email 2: Input the second e-mail address that event messages are sent to.
Receiver Email 3: Input the third e-mail address that event messages are sent to.
Email Subject: Input email subject.
Test Status: You can click the Test button to test the email function. If the function works fine,
a Pass message will be displayed; otherwise, a Fail message will be displayed.
Save: Click to save the settings.
99