Table of Contents
Advertisement
1)
Press 【Analysis】 in MKR/ANALYSIS area and press corresponding soft-key of [Bandwidth Test]in the soft-key menu
that turns up.
2)
Press corresponding soft-key of [BW Test ON|off] to close bandwidth test function.
3)
Press corresponding soft-key of [BW Display ON|off] to close the display of bandwidth .
4)
Press corresponding soft-key of [BW Marker ON|of] to close the locating marker of bandwidth.
5)
Press corresponding soft-key of [Fail Sign ON|off] to close the display of fail mark of bandwidth test.
6.5.Bandwidth Searching
Bandwidth searching is a function to confirm trace bandwidth、center frequency、cut-off point、Q value and insertion loss through
searching signal peak value in the band.
Bandwidth searching function menu has newly increased the filter test function, which is used for the automatic test of filter. The
tested parameters of filter is automatically displayed on the screen, this function simplifies the setup of filter test process and
improves the test speed of filter.
6.5.1. Open and close bandwidth searching
Bandwidth searching can only be set through soft-key menu.
1)
Press 【Search】in MKR/ANALYSIS area, press corresponding soft-key of [Bandwidth] on the soft-key menu that
turns up.
2)
Press corresponding soft-key of [Bandwidth] to enable bandwidth searching function.
3)
Press corresponding soft-key of [Bandwidth Level] and set bandwidth level in the input box which can change the
bandwidth cut-off frequency.
4)
Press corresponding soft-key of [Tracking on|OFF] to enable search and track function.
5)
Press corresponding soft-key of [Bandwidth Off] to close bandwidth searching function.
6.5.2. Display bandwidth searching result
The six parameters of bandwidth will be displayed on the upper right of the trace.
Tel: 886.2.2175 2930 Email: sales@salukitec.com
99
www.salukitec.com
Advertisement
Table of Contents
