Saluki S3601 Series User Manual page 140

rotate knob to switch to [Gate Setting] option button, press 【Tab】to switch to [Gating] check to, press【Click】to
select the check box and Stimulus filtering function of time domain gate, then set the function of time domain gate.
Press 【Tab】to switch to [Start], [Stop] or [Center], [Span] to set gate border.

Press 【Tab】to switch to [Gate Type] box, press 【↑】, 【↓】 or rotate knob to select gate type: band pass, band stop.

Press 【Tab】to switch to [Gate Shape] box, press 【↑】, 【↓】or rotate knob to select gate form: minimum, standard, wide,

maximum.
g) If it is necessary to observe frequency domain response of the measured piece when the gate function is still effective,
press 【Tab】 to switch to [Gate Setting] option button, press 【↑】 , 【↓】 or rotate knob to switch to [Transform] option
button, press 【 Tab 】 to switch to [Transform], press 【 Click 】 to clear the check box and close time domain
transformation function.
h) Press 【OK】in Input keypad to close Time Domain Transform dialog box after setting.
-End of Document-
140
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com