Table of Contents
Advertisement
By front panel keys
1)
Press 【Meas】in RESPONSE area.
2)
Press the corresponding soft-key to select S-parameter Measure type on existing soft-key menu.
Changing current Active Trace to be arbitrary ratio type
4.2.4.3.
By mouse or touch screen
1)
Single click [Response] and point to [Measure] in Response menu to display submenu of Measure.
2)
Single click menu item of [Measure...] in submenu to display Measure dialog box.
3)
Single click [More Type] button to display Measure dialog box.
4)
Select the source output port of Analyzer from [Source] box.
5)
Click [Scale Type] to mark check box.
6)
Select input receiver for ratio Measure from Input zone.
7)
Select reference receiver for ratio Measure from Reference zone.
8)
Single click [OK] button to close the dialog box after the setting is completed.
By front panel keys
1)
Press【Meas】in RESPONSE area and single click the soft-key corresponding to [Measure...] to display Measure dialog
box.
2)
Press 【Tab】 in ADJUST area to switch to [More Type] button and press 【Click】to display Next-level Measure dialog
box.
3)
Press 【Tab】 in ADJUST area to switch to [Source] box and press 【↑】 and 【↓】 or rotate knob to select source output
port of Analyzer.
4)
Press 【Tab】 in ADJUST area to switch to [Scale Type] and press 【Click】 to mark check box.
5)
Press 【Tab】in ADJUST area to switch to Input zone and press 【↑】 and 【↓】or rotate knob to select input receiver
of ratio Measure.
6)
Press【Tab】 in ADJUST area to switch to Reference zone and press 【↑】and 【↓】 or rotate knob to select reference
receiver of ratio Measure.
7)
Press 【OK】in ENTRY area to close dialog box.
Fig. 4-7 Changing Current Active Trace to be Arbitrary Ratio Type
Tel: 886.2.2175 2930 Email: sales@salukitec.com
39
www.salukitec.com
Advertisement
Table of Contents
