【Start】
It is used to set the range of starting frequency value and the frequency offset.
【Stop】
It is used to set the stop frequency value.
【Center】
It is used to set the center frequency value.
【Span】
It is used to set the frequency range.
【Sweep】
It is used to select the manner of signal source sweep and relevant properties.
【Trigger】
It is used to set how to start an initialized sweep Measure.
3.1.6. Mkr/Analysis Zone
Controlling all aspects of data analysis, including marker and mathematical calculation.
【Marker】
It is used to Stimulus the marker and set the stimulus value of the marker. The marker can provide digital reading of the
Measure result. The analyzer can support at most 9 markers and the reference marker R.
【Search】
It provides the marker search function. Press this key to Stimulus a marker if there are no markers displayed.
【Memory】
It is used to set the mathematical operation and saving of Measure data by the analyzer.
【Analysis】
It includes the functions such as limit test, trace statistic, conversion of gates, windows and time domains.
3.1.7. Entry Zone
Fig. 3-6 Stimulus Keys
Fig. 3-7 Marker/Analysis Keys
19
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com