Table of Contents
Advertisement
It's used for various operation of Measure data Trace.
【Meas】
It is used to select the type of S parameter to be measured and the type of any specific-value or non-specific value power
Measure.
【Format】
It is used to select the format in which the Measure data are displayed on the analyzer.
【Scale】
It is used to set the scale at which the Measure trace is displayed on the analyzer.
【Display】
It is used to create a new window, select or Stimulus the current window, or make display settings.
【Avg】
With the key 【Avg】, the noise can be reduced by use of the Measure averaging function. The analyzer reduces the effect of
random noise on the Measure result by executing complex exponential average of a number of sweeps for designated times
when the average factor is designated.
【Cal】
The Measure calibration can be started to make operations such as power calibration.
3.1.4. Trace/Chan Zone
Managing Trace and Channel on display of Analyzer.
Fig.3-4 Response Keys
17
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
