Table of Contents
Advertisement
5)
Click [Import File] of corresponding port, select the S2P file to be used in the dialog box that turns up and the file
name will be displayed in the box at the lower part.
6)
Click [OK] to close the dialog box, and save the input;click [Cancel] to close the dialog box,and cancel the saving of
the input.
By front panel keys
6.7.2.2.
1)
Press 【 Analysis】 in MKR/ANALYSIS area, and press corresponding soft-key of [Fixture Simu...] in the soft-key menu
that turns up.
2)
Press corresponding soft-key of [Fixture Simu... on|OFF] to open and close the fixture simulator function.
3)
Press corresponding soft-key of [De-Embedding] and press corresponding soft-key of [De-Embedding on|OFF] in
the sub-menu of soft-key that turns up to enable the network de-embedding function.
4)
Press the soft-key of [Select Port 1|2], to shift to corresponding port.
5)
Press the soft-key of [Select Type User|None], to shift to corresponding type;User corresponds to the enabling of
corresponding port; None corresponds to the disabling of the corresponding port.
6)
Press the soft-key of [User File...] select the S2P file to be used in the dialog box that turns up and the file name will
be displayed under the soft-key.
6.7.3. Matching circuit embedding
It can add virtual matching circuit for every test port to simulate the whole test characteristics.
By mouse or touch screen
6.7.3.1.
1)
Click[Marker/Analysis] menu, click [Fixture Simulator] in the menu of [Analysis] and click [Fixture Simulator on/OFF]
in the sub-menu to enable the fixture simulator function.
2)
Click [Marker/Analysis] menu, click [Fixture Simulator] in the menu of [Analysis], and click [Port Matching] in the
sub-menu that turns up to open the matching circuit embedding dialog box.
3)
Click [On/Off] in the dialog box to enable the matching circuit embedding function.
Figure 6-23 Display Fixture De-embedding Dialog Box
107
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
