Table of Contents
Advertisement
Gate type: band-pass
Global display setting
Status bar of Trace: on
Frequency/activation: on
Marker reading: on
4.1.2. User reset state
The Analyzer can be reset to a known default state or a state defined by user. Under the default condition, the Analyzer is reset to the
default state defined before leaving factory and it can be reset to the state specified by user via setting.
Setting user reset state
4.1.2.1.
1)
By mouse or touch screen
2)
Single click [Utility] and then single click [Define User State..] in the system menu to display the dialog box of defining user
reset state.
3)
Single click [save current state as user state] button, the Analyzer will save the current instrument setting as user reset
state.
4)
If you want to use the existing state, single click [load exist file as user reset state] button, select state file from the opened
dialog box to enable it, and the selected file is used as state file for user reset by Analyzer.
5)
Click [Enable user reset state] to mark check box.
6)
Single click [OK] button to close the dialog box.
By front panel keys
1)
Press 【Menu】 key in ENTRY area.
2)
Press 【Tab】 key in ADJUST area to switch to the [Define User State] menu item under the system menu and press
【Click】 key in Adjust area to display the dialog box of Define User Reset State.
3)
If you want to amintain the current setting of Analyzer at user reset state, press 【Tab】 to switch to [Save Current State
as User Preset] button and then press【Click】.
4)
If you want to use the existing state, press 【Tab】to switch to [Load Existed File as User reset State] button and then
press 【Click】, and select state file from the opened dialog box to enable it and the selected file is used as state file for
reset.
Fig.4-1 Define User Reset State
34
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
