Saluki S3601 Series User Manual page 120

Analyzer supports settinging print content and printout mode, and methods are as following:
By mouse or touch screen
7.2.1.1.
1) Click [File], and click [Page Setup...] on [Print] menu to display Page Settings dialog box.
2) Set up printed content in the dialog box.
3) Click [Ok] to close the dialog box.
Dialog box of print Page Setup
7.2.1.2.
Window's Info zone

[Print]

If it is selected, window Trace information will be printed, and if not, window Trace information will not be printed. The following
options can be effective only when the check box is selected.
[Print Active Window]

If selecting it, only the content of current Stimulus window is printed.
[Print All Windows]

If selecting it, content information of all windows will be printed.
[One Window per Page]

If it is selected, one window is only printed per page; if it is cleared, all windows content will be continuously printed without forced
page break.
Other Info zone

[Print]

When it is selected, other settings and status information will be printed, and the following options are effective; when it is cleared,
and the information will not be printed.
[Segment Table]

When it is selected, segment table will be printed.
[Limit Table]

When it is selected, limit table will be printed.
[Marker Table]

When it is selected, marker table will be printed.
[Channel State]

Figure 7-4 Print Content Setting
120
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com