Table of Contents
Advertisement
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Figure 6-24 Display Matching Circuit Embedding Dialog Box
Choose proper circuit type in the drop-down box corresponding to port1 and port2, the circuit type will be displayed at the lower part.
Enter the value of capacitance, conductance, inductance and resistance in corresponding editing box; when the circuit type is USER,
the [Self Define] will be in enabled state, click [Self Define], select the S2P file to be used in the dialog box that turns up and the file
name will be displayed in the box aside.
108
Advertisement
Table of Contents
