Table of Contents
Advertisement
By front panel keys
1)
Press 【Sweep】 key in STIMULUS area and press the soft-key in soft-key menu corresponding to [Sweep Type].
2)
Press the soft-key corresponding to [Logarithm Frequency] to select the sweep type.
3)
Press 【Start】in STIMULUS area and enter start frequency in start frequency box; press 【Stop】in Stimulus area and
enter stop frequency in stop frequency box.
4)
Press 【Sweep】in STIMULUS area, press the soft-key corresponding to [Number of
number in Number of Points box.
Setting of power sweep type
4.5.2.3.
By mouse or touch screen
1)
Click [Stimulus], then click [Sweep Type...] from menu [Sweep] to show dialog box Sweep Type.
2)
Click [Power Sweep] option button from Sweep Type.
3)
Set start power, stop power and center frequency in Sweep Feature.
4)
Click [OK] to close the dialog box.
Fig. 4-12 Setting of Sweep Type - Logarithmic Frequency
46
Tel: 886.2.2175 2930 Email: sales@salukitec.com
Points] and enter Sweep spot
www.salukitec.com
Advertisement
Table of Contents
