Display Screen; On/Standby】Key And Indicator Light - Saluki S3601 Series User Manual

Display Screen

3.1.10.
Screen display of Analyzer is shown in the following figure.
TFT LCD is adopted for the display screen of Analyzer, with technical specifications as follows:
TFT, 10.4 inches, LCD

Resolution: 800×600.

Vertical refresh rate: 60.31Hz.

Horizontal refresh rate: 37.88 kHz.

Brightness: >350NIT.

【On/Standby】Key and Indicator Light
3.1.11.
【On/Standby】switch the analyzer between On and Standbys condition.
For the On condition, the indicator light is green.

For the Standbys condition, the indicator light is orange.

When the analyzer is On, press 【On/Standby】, the analyzer will quit the application program, switch off the power and enter

Standbys condition automatically.
When the analyzer is Standby, press 【On/Standby】, the analyzer will automatically run

Windows XP Operation System and load the Measure application program of the analyzer.

Fig. 3-10 USB Interfaces
Fig. 3-11 Display Screen of the Analyzer
22
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com