Table of Contents
Advertisement
4.6.Selecting Triggering Mode
Trigger signal is the signal controlling the Analyzer for Sweep Measure. Trigger settings determines the Sweep mode of Analyzer and
when the sweep stops and returns to hold mode. The Analyzer is quite flexible in trigger function settings.
4.6.1. Simple Trigger Settings
Simple trigger settings can set the trigger mode for the current Stimulus channel only.
By mouse or touch screen
1)
Click [Stimulus] and point to [Trigger] in Stimulus menu to show the submenu of Trigger.
2)
Select the trigger mode needed in the submenu.
By front panel keys
1)
Press 【Trigger】in STIMULUS area to show corresponding soft-key menu.
2)
Press the corresponding soft-key to select the trigger mode needed.
4.6.2. Detailed Trigger Settings
By mouse or touch screen
4.6.2.1.
1)
Click [Stimulus], point to Trigger in Stimulus menu and click [Trigger...] in the submenu of Trigger to show Trigger dialog
box.
2)
Complete trigger settings in the dialog box.
3)
After setting, click [OK] to close the dialog box.
Fig. 4-19 Simple Trigger Mode
Fig. 4-20 Submenu of Trigger
53
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
