Table of Contents
Advertisement
Triggering of toolbars display
4.9.2.1.
By mouse or touch screen
1)
Click [Response], point at [Display] on the Response menu, and point at [Toolbars] on the display submenu.
2)
Click the tool bar to be set up in Toolbars submenu, enable toolbar display when checking, and close toolbar display when
removing the tick.
By front panel keys
1)
Press [Display] in RESPONSE area to display the corresponding soft-key tool bar, and press soft-key corresponding to
[More].
2)
Press the soft-key corresponding to [Toolbars] to display the Toolbars submenu.
3)
Press the wanted toolbar soft-key, enable the toolbar display when it is "On", and close toolbar display when it is "Off".
4.9.3. Tables
The Analyzer can display the marker table, limit table and segment table, and it can observe and modify their settings (can not edit
the marker table).
The table is displayed under the corresponding window.
Every window can display only one table every time.
Marker table
4.9.3.1.
The marker table is used to display settings of marker, and these settings contain:
Marker number
Figure 4-32 Triggering of Toolbars Display
Figure 4-33 Marker Table
67
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
