Lan Connector; Usb Connector; External Trigger Input Connector - Saluki S3601 Series User Manual

When [Monitor] is checked, only the external VGA monitor can be used to observe the display and there is no display on the

internal LCD.
When [Computer] is checked, only the internal LCD can be used to observe the display and there is no display on the external

VGA.
When [Monitor+Computer] is checked, the external VGA monitor and the internal LCD can be used at the same time.


3.2.4. LAN Connector

This is a 10/100 BaseT Ethernet connector with standard 8-pin structure, which can automatically select one from the two data rates.

3.2.5. USB Connector

The plughole of the connector is Type A configuration (embedding 4 contacts: Contact 1 is on the left), providing two interfaces
complying with USB 2.0 specification, and the property of every interface is as below:
Contact 1: Vcc, 4.75V~5.25V, 500mA (maximum output current).

Contact 2: Data-.

Contact 3: Data+.

Contact 4: Ground.

This connector can connect USB mouse, keyboard and other USB interface devices.

3.2.6. External Trigger Input Connector

The Trig In port is used for external trigger signal input..
Fig. 3-18 Configuration of Multi-Display Mode
Fig. 3-19 LAN Connector
Fig. 3-20 USB Connector
25
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com