menu that turns up.
2)
Press corresponding soft-key of [BW Test on|OFF ] to enable bandwidth test.
3)
Press corresponding soft-key of [BW Display on| OFF] to enable bandwidth display function.
4)
Press corresponding soft-key of [BW Marker on|OFF] to enable bandwidth locating marker.
5)
Press corresponding soft-key of [Fail Sign on|OFF] to enable the display of fail mark of bandwidth test.
6)
Press corresponding soft-key of [N dB Points], and set bandwidth threshold in the input box.
7)
Press corresponding soft-key of [Min BW] and set minimum bandwidth in the input box.
8)
Press corresponding soft-key of [Max BW] and set maximum bandwidth in the input box.
6.4.2. Display bandwidth test result
The result of bandwidth test is displayed on the upper left side of the trace, if the test is passed, the word " PASS"will turn up on the
screen. The red T shaped bandwidth mark distribute on the two sides of bandwidth.
6.4.3. Close bandwidth test
By mouse or touch screen
6.4.3.1.
1)
Click [Marker/Analysis] and click [Limit Test...] on the menu of [Analysis] to display limit test dialog box.
2)
Click [Bandwidth Test] in the dialog box to display the bandwidth test dialog box.
3)
Click [Bandwidth Test(on/OFF)] to close bandwidth test.
4)
Click [Bandwidth Value(on/OFF)] to close the display of bandwidth test.
5)
Click [Bandwidth Marker (on/OFF)] to close the display of bandwidth locating marker.
6)
Click [OK] to close bandwidth test.
By front panel keys
6.4.3.2.
Figure6-16 Bandwidth Test Result Display
98
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com