Traces, Channels And Windows; Traces; Channels - Saluki S3601 Series User Manual

3.4.Traces, Channels and Windows

3.4.1. Traces

Trace is a series of measured data points and its setting will influence arithmetical operation and display of measured data, and only
when Trace is in the Stimulus state, it can change its setting. Single click the corresponding Trace state button to activate the Trace,
and the detailed setting method is shown in "Changing Stimulus State of Trace" Part of "Selecting Measure Parameter" in Section 2
of Chapter V, and the setting for Trace includes:
Parameters

Format

Scale

Calibration ON / OFF

Trace Math

Marker

Electrical Delay

Phase Bias

Smoothing

Time Domain Transformation


3.4.2. Channels

Channels contain traces. The analyzer supports up to 64 independent channels. Channel settings determine how the trace data is
Fig. 3-24 Analyzer User Interface
28
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com