Filter Test - Saluki S3601 Series User Manual

Parameter definition
6.5.2.1.
BW

Frequency difference between right and left cut-off frequency point.
Center

The middle frequency between right and left cut-off frequency point.
Q

The value of dividing bandwidth with central frequency.
LOSS

The tested value of bandwidth central frequency point.
Low

The lower frequency of the two points which are lower than the signal peak value on specific bandwidth level.
High

The higher frequency of the two points which are lower than the signal peak value on specific bandwidth level .

6.5.3. Filter test

The analyzer is installed with a shortcut function for the test of filter. All the tested parameters will be displayed on the screen and it is
very convenient for users to see the test results. The filter test function decreases the manual setup during the test process and
improves the test speed greatly.
Open and close filter test
6.5.3.1.
Figure 6-17 Bandwidth Searching
100
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com