Saluki S3601 Series User Manual page 70

1) Frequency/stimulus value
The frequency/activation information is displayed under each window on the screen, this display can be hidden for the purpose of
keeping secret. The information it displays is as follows:
Channel No.

Start stimulus value

Stop stimulus value

Marker reading
4.9.4.2.
The marker reading information is displayed at the top right corner of each window on the screen, and it displays information as
follows:
Marker No.

stimulus value of marker

Response value of marker selection format

One marker for each Trace
4.9.4.3.
When checking this item, only 1 marker can be enabled on each Trace.
Big marker
4.9.4.4.
When checking this item, the typeface of marker reading becomes bigger.
Limit test result
4.9.4.5.
The limit test result (PASS or FAIL) is displayed at the lower right corner of each window.
Limit line
4.9.4.6.
The limit line targets at Active Trace display in the designated window, and its position depends on following settings;
Limit table

Format

Scale

Reference level

Title
4.9.4.7.
Each window can have a title, the title can be created by the Title Input dialog box below, and it is displayed at the upper right corner
of the window. If you want to remove the title, delete it in [Input] of the dialog box and click [OK] to close the dialog box.
Tel: 886.2.2175 2930 Email: sales@salukitec.com
70
www.salukitec.com