【Save】
It's used for saving instrument status, calibration data or Measure data in specified files.
【System】
It's used for some system-related configuration and selection of software language, etc.
【Preset】
It's used to reset Analyzer to default (predefined) status.
【Recall】
It's used for invoking files containing Analyzer status, calibration data and Measure data.
【Print】
It's used to start printing function, select print settings and printer for printing.
【Micro/Local】
When Analyzer is in external control state, press this key to make the Analyzer re-respond to the buttons on front panel.
When Analyzer is in normal working state, press this key to access a set of user-defined macros associated with
executable files.
Analyzer can name and store 10 macros at most.
【F 1】
It is used to record shortcut keys in operating a certain Measure (the record can be effective only by operating with front-panel
keys).
【F 2】
It is used to record shortcut keys in operating a certain Measure (the record can be effective only by operating with front-panel
keys).
【Help】
It is used to open the user manual of the analyzer (a built-in file).
3.1.3. Response Zone
Fig.3-3 Utility Keys
16
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com