Table of Contents
Advertisement
3.2.7. External Trigger Output Connector
After the system is all set, the vector network can output trigger signals.
3.2.8. Power Socket and Power Switch
Power socket
3.2.8.1.
The power socket is used to connect power cords and the three-core power cord with ground wire (provided along with instrument) is
recommended.
Power switch
3.2.8.2.
During the normal working process of Analyzer, the power switch shall be kept in "ON" position, and please do not turn off the
instrument by the power switch or unplug the power cord, which may cause faults on software or hardware of Analyzer.
3.3.Display Screen / User Interface
The Analyzer interface refers to the method of setting and operating Analyzer by users, including front panel interface and
mouse-driven user interface:
3.3.1. Front Panel Interface
Users can use front panel key to set and operate Analyzer by 2 ways.
Using soft-key toolbar
Fig. 3-21 External Trigger Input Connector
Fig. 3-22 External Trigger Output Connector
Fig. 3-23 Power Socket and Power Switch
26
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
