Options in Sweep Feature zone
[Independent Power Level] check box: when selected, independent power level can be set for each segment which
must be of the same attenuator setting.
[Independent IF Bandwidth] check box: when selected, independent IF bandwidth can be set for each segment.
[Independent Sweep Time] check box: when selected, independent Sweep time can be set for each segment.
[Show Table]: click the button to show segment table, then create and edit the segment table.
[Hide Table]: click to hide segment sweep list.
By front panel keys
1)
Press 【Sweep】in STIMULUS area and press the soft-key in soft-key menu corresponding to [Sweep Type].
2)
Press the soft-key corresponding to [Segment Sweep] to select the sweep type.
3)
Press the soft-key corresponding to [Segment Table on | OFF] to show segment table for edit.
Insertion and deletion of segment
4.5.2.6.
The segment table can be edited only when it's in display status.
By mouse or touch screen
1)
Click [Stimulus], point to [Segment Table] in Sweep submenu to show the submenu of segment table.
2)
Select [Show Table] in Segment Table submenu.
3)
Click [Insert Segment] in Segment Table submenu to insert a new segment before the selected segment.
4)
Click [Delete Segment] in Segment Table submenu to delete all selected segments. Click [Delete All Segment] to delete all
segments.
Fig.4-15 Setup of Segment Sweep Type
49
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com