Table of Contents
Advertisement
By front panel keys
6.7.1.2.
1)
Press【Analysis】in MKR/ANALYSIS area, and press corresponding soft-key of [Fixuture Simu...] in the soft-key
menu that turns up.
2)
Press corresponding soft-key of [Fixture Simu... on|OFF] to trigger the opening and closing of fixture simulator
function.
3)
Press corresponding soft-key of [Port ZConver...] and press corresponding soft-key of [Z Conversion on|OFF] on the
sub-menu to enable the impedance conversion function.
4)
Press corresponding soft-key of [Port1 Z0 Real], [Port1 Z0 Imag], [Port2 Z0 Real], [Port2 Z0 Imag] , and enter
corresponding value in the input box that turns up.
6.7.2. Network De-embedding
Network De-embedding function can eliminate any network characteristics defined by Touchstone data file(.snp) between test plane
and DUT plane to extend corresponding calibration plane.
By mouse or touch screen
6.7.2.1.
1)
Click [Marker/Analysis] menu, click [Fixture Simulator] in the menu of [Analysis], and click [Fixture Simulator on/OFF]
on the sub-menu to enable the fixture simulator function.
2)
Click [Marker/Analysis] menu, click [Fixture Simulator] in the menu of [Analysis], and click [De-embedding] in the
sub-menu that turns up to open the fixture de-embedding dialog box.
3)
Click [ON/OFF] in the dialog box to enable the fixture de-embedding function.
4)
Click corresponding soft-key of [Enable1], [Enable2] button of port1 and port2 to activate the de-embedding function
of corresponding port.
Figure 6-22 Impedance Conversion Dialog Box
106
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com
Advertisement
Table of Contents
