Moving The Marker - Saluki S3601 Series User Manual

[Marker]

Used to select the marker to be defined.
[Stimulate]

Set and select the stimulus values of marker axle X.
[on]

Check it to enable the marker in [Marker], clear and close the marker in [Marker].
[△ Marker]

When checking it, the Analyzer displays the relative values between selected marker and marker R. If marker R is not enabled, it will
be enabled automatically.
[Advanced Marker]

Click it and display [Marker Advanced Options] dialog box.
[Close All]

Click it and close all enabled marker.

6.1.2. Moving the marker

1) Select the marker to be moved by one of the methods mentioned above to make it be the current Stimulus marker.
2) Use appropriate methods to move the marker
a.Click [Stimu] in Marker toolbar, and move the marker by following methods:
 Directly input marker stimulus values.
 Revolve the knob to move the marker.
 Click UpDown on [Stimu] to move the marker.
 Press 【↑】or【↓】 in ADJUST area to move the marker.
b.Click [Stimulate] box in Marker dialog box, and move the marker by following methods:
 Directly input marker stimulus values.
 Revolve the knob to move the marker.
 Click UpDown on [Stimulate] box to move the marker.
 Press 【↑】or【↓】in ADJUST area to move the marker.
c.Move the marker by following methods in the Marker box of Marker corresponding to the soft-key toolbar.
 Directly input stimulus values.
 Revolve the knob to move the marker.
 Click UpDown on Marker box to move the marker.
 Press 【↑】or【↓】 in ADJUST area to move the marker.
For above described methods of moving the marker, the marker can only be moved after it is activated. Besides, S3601 Series
Vector Network Analyzer supports moving the marker by dragging the mouse directly, and the method is:
Point the mouse to indicator "
after the mouse pointer becomes horizontal Adjust indicator "↔", drag the mouse to the position where the marker is required to be
" (active marker) or "△" (inactive marker) of the marker to be moved, press left mouse button, then
Tel: 886.2.2175 2930 Email: sales@salukitec.com
83
www.salukitec.com