Saluki S3601 Series User Manual page 91

By front panel keys
1) Press 【Memory】 key in MKR/ANALYSIS area.
2) Press corresponding soft-key of [Data->Memory] to save current measured Trace data in memory.
3) Press corresponding soft-key of [Date Math Off] to display various mathematical operation and set up computation of
Trace according to corresponding soft-key.
4) Press corresponding soft-key of [Data Trace] to display measured data.
5) Press corresponding soft-key of [Memory Trace] to only display measured data.
6) Press corresponding soft-key of [ Data and Memory] to display measured data and stored data at the same time.
Computation/ Storage dialog box
[Data->Memory]

When clicking it, current measured data will be saved in memory.
[Data Math]

It is used to select Trace math type, and the Analyzer supports the following Trace math:
Data: it will not make any type of mathematical operation.

Data + Memory: it will implement addition computation for measured data and stored data.

Data – Memory: it implements subtraction operation for measured data and stored data, and this function can be used for

simple error correction; firstly save vector error data in memory, and then subtract error data from measured data of the part.
Data * Memory: it will implement multiplication operation for measured data and stored data.

Data / Memory: it implements division operation for measured data and stored data, and this function is mainly used to make

ratio Measure, such as gain and attenuation Measure.
Trace View Option Zone
[Data Trace]

When it is selected, data after Trace math will be only displayed.
[Memory Trace]

When it is selected, stored Trace data will be only displayed.
Figure 6-11 Settings of Trace Math
91
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com