Data Analysis; Marker - Saluki S3601 Series User Manual

6. Data Analysis

This chapter intends to describe how to read Measure result and calculate and Analysis the result, including following contents:

Marker


Trace math and statistics

Limit test

Bandwidth test

Bandwidth searching

Ripple test

Fixture Simulator

Parameter Transformation

6.1.Marker
Marker can be used to read measured data, search measured values of specified types and change the settings of Analyzer. Each
Trace can use 9 normal markers and 1 reference marker.
Create a marker
6.1.1.1.
By mouse or touch screen -marker toolbar
1) Click [Response], point to [Toolbars] on [Display] menu, click and check [Markers] on Toolbar submenu, then the
Analyzer displays Marker toolbar.
2) Select the marker to be enabled in [Mkr] box of the toolbar.
3) Click and check [ON] check box.
4) Set stimulus values of the marker in [Stimu] box.
Fig. 6-1 Using Marker Toolbar to Create the Marker
81
Tel: 886.2.2175 2930 Email: sales@salukitec.com
www.salukitec.com