Table of Contents
Advertisement
6.8.Parameter Transformation
Parameter transformation function can transform the test result of S parameter into other parameters in real time.
6.8.1. Parameter transformation
By mouse or touch screen
6.8.1.1.
1)
Click [Marker/Analysis] menu，and click [Conversion] on the menu of [Analysis] to open the dialog box of parameter
transformation.
2)
Click the [Enable] check box in the dialog box to enable the parameter transform function.
3)
Click the parameter transformation type box in the dialog box and select the parameter type to be transformed on
the drop-down menu.
By front panel keys
6.8.1.2.
1)
Press 【Analysis】in MKR/ANALYSIS area and press [Conversion] in the soft-key menu that turns up.
2)
Press [Conversion on|OFF] to trigger the opening and closing of parameter transformation function.
3)
Press [Function], and select corresponding transformation type in the sub-menu of soft-key that turns up.
6.8.2. Function type of parameter transformation
Parameter transformation function is used to transform the test result of S parameter（Sxy) into the following parameters:
Z
Impedance (
) and admittance (
r
Impedance(
)and admittance(
Z
t
Impedance(
Z
)and admittance (
t
s
Figure 6-26 Parameter Transformation Dialog Box
Y
) in reflection test
r
Z
Z
0X
r
Y
) in transmission test
t
2
Z
Z
0X
Z
t
S
xy
Y
) in the parallel transmission
ts
Tel: 886.2.2175 2930 Email: sales@salukitec.com
1
S
1
xy
Y
，
r
1
S
Z
xy
r
0Y
Z
Z
Y
，
0X
0Y
t
110
www.salukitec.com
1
Z
t
Advertisement
Table of Contents
