Lan Communication - IDK MSD-72 Series Command Reference Manual

@GCF / @SCF
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set operation modes of RS-232Cs.
Setting Command
example Response
Description Setting RS-232C CH1 to TRANSMITTER mode.
Remarks

3.3.12 LAN communication

@GIP / @SIP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the IP address of the MSD.
Setting Command
example Response
Description Setting IP address to 192.168.3.2.
Remarks
RS-232C communication mode
@GCF
@GCF, mode_1, mode_2
@SCF, port, mode
@SCF, port, mode
mode: Operation mode
mode_1: RS-232C CH1 operation mode
mode_2: RS-232C CH2 operation mode
0 = RECEIVER mode [Default], 1 = TRANSMITTER mode
port: RS-232C channel
0 = All channels,
2 = RS-232C CH2
@GCF
@GCF,1,1
TRANSMITTER mode
@SCF,1,1
@SCF,1,1
These commands are only for RS-232C.
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD
settings.
IP address
@GIP
@GIP, unit_1, unit_2, unit_3, unit_4
@SIP, unit_1, unit_2, unit_3, unit_4
@SIP, unit_1, unit_2, unit_3, unit_4
unit_1: Upper bit of the IP address to unit_4: lower bit of the IP address
0 to 255 = 8 bit (Decimal notation) [Default] 192.168.1.199
@GIP
@GIP,192,168,3,2
IP address:192.168.3.2
@SIP,192,168,3,2
@SIP,192,168,3,2
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD
settings.
MSD-72 series Command Guide
1 = RS-232C CH1,
75