IDK MSD-72 Series Command Reference Manual page 57

@GOF / @SOF
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GMT / @SMT
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set masking time after automatic switching of input channel.
Setting Command
example Response
Description Setting the masking time to 2000 ms. (2 sec.) for OUT1 and OUT2, 10000 ms.
Remarks
Priority of input channel automatic switching (ON to OFF)
@GOF, out
@GOF, out, in1_priority, in2_priority, in3_priority, in4_priority, in5_priority,
in6_priority, in7_priority, in8_priority, in9_priority
@SOF, out_1, in1_priority, in2_priority･･･, in9_priority (, out_2, in1_priority･･･)
@SOF, out_1, in1_priority, in2_priority･･･, in9_priority (, out_2, in1_priority･･･)
out, out_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
in1_priority-in9_priority: Priority
0 = OFF, 1 = Priority (high) to 9 = priority (low)
@GOF,1
@GOF,1,1,2,3,4,5,6,7,8,9
Getting the set priority of OUT1's automatic switching.
IN1>IN2>･･･>IN9
@SOF,1,9,8,7,6,5,4,3,2,1
@SOF,1,9,8,7,6,5,4,3,2,1
Setting the priority of OUT1's automatic switching to IN9>IN8>･･･>IN1.
－
Masking time after automatic switching of input channel
@GMT
@GMT, time_1, time_2, time_3, time_4
@SMT, ch_1, time_1 (, ch_2, time_2･･･)
@SMT, ch_1, time_1 (, ch_2, time_2･･･)
time_1-4: Masking time
0 = 0 to 999999 = 999.999 sec. [Default] 0
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GMT
@GMT,2000,2000,10000,10000
Automatic switching is not performed until the following time passes:
OUT1 and OUT2: 2000 ms. (2 sec.), OUT3 and OUT4: 10000 ms. (10 sec.)
@SMT,1,2000,2,2000,3,10000,4,10000
@SMT,1,2000,2,2000,3,10000,4,10000
(10 sec.) for OUT3 and OUT4.
－
MSD-72 series Command Guide
57