IDK MSD-72 Series Command Reference Manual page 41

@GID / @SID
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the setting of automatic detection of input video interruption.
Setting Command
example Response
Description Setting IN2 automatic detection to OFF ("0").
Remarks
@GIN / @SIN
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set DVI input signal.
Setting Command
example Response
Description Setting IN8 to digital input signal.
Remarks
Automatic detection of input video interruption
@GID
@GID, detect_1, detect_2, detect_3, detect_4, detect_5, detect_6, detect_7,
detect_8, detect_9
@SID, ch_1, detect_1 (, ch_2, detect_2･･･)
@SID, ch_1, detect_1 (, ch_2, detect_2･･･)
detect_1-9: Automatic detection
0 = OFF, 1 = ON [Default]
ch_1-9: Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
@GID
@GID,1,1,1,1,1,0,1,1,1
IN6: If input video signal is interrupted, the video output is not turned off instantly.
Other inputs: OFF
@SID,2,0
@SID,2,0
If input video signal is interrupted, not to turn off the video output instantly.
－
Signal selection of DVI input connector
@GIN
@GIN, signal_1, signal_2
@SIN, ch_1, signal_1 (, ch_2, signal_2)
@SIN, ch_1, signal_1 (, ch_2, signal_2)
signal_1-2: Signal selection of DVI input connectors (IN8, IN9)
0 = Analog signal, 1 = Digital signal [Default]
ch_1-2: Input channel
0 =All analog inputs, 8 = IN8, 9 = IN9
@GIN
@GIN, 0, 0
IN8 and IN9: Analog input signal
@SIN, 8, 1
@SIN, 8, 1
－
MSD-72 series Command Guide
41