IDK MSD-72 Series Command Reference Manual page 95

@SCV / @SEV
Setting Description Overwriting all
Command
Response
Setting Description Overwriting partly
Command
Response
Parameter
Setting Command
example Response
Description Saving the current video channel in crosspoint memory 2 without changing
Setting Command
example Response
Description Saving the current video channel in crosspoint memory 2 with the name of
Remarks
@GCV / @ECV
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Saving crosspoint memory (Setting video channel)
@SCV, memory (, name)
@SCV, memory (, name)
@SEV, memory (, name)
@SEV, memory (, name)
memory: Crosspoint memory
1 to 9
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes.
If you do not specify memory name, only settings of crosspoint are saved
without changing the memory name.
@SCV,2
@SCV,2
memory name.
@SEV,2,PATTERN2
@SEV,2,PATTERN2
"PATTERN2". Output settings that are set to Not Controlled are not saved.
－
Editing crosspoint memory (Setting video channel)
@GCV, memory
@GCV, memory, v_1, v_2, v_3, v_4, name
@ECV, memory, v_1, v_2, v_3, v_4
@ECV, memory, v_1, v_2, v_3, v_4
memory: Crosspoint memory
1 to 9
v_1-4: Video channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 9 = IN9
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes. [Default] 20 (space)
@GCV,2
@GCV,2,3,1,1,1,PATTERN2
Getting video channel of crosspoint memory 2.
OUT1: IN3, Other 2: IN1 are saved with the name of "PATTERN2".
@ECV,2,1,1,-1,-1
@ECV,2,1,1,-1,-1
When crosspoint memory 2 is loaded, OUT1 and OUT2 are set to IN1 and OUT3
and OUT4 are set to Not controlled.
Nothing is saved in the memory by factory default, the state is "-1" (Not
controlled). If you save only audio (@SCA) at the first saving of crosspoint
settings, "-1" (Not controlled) is returned to unsaved audio and video.
MSD-72 series Command Guide
95