IDK MSD-72 Series Command Reference Manual page 45

@GHS / @SHS
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Horizontal start position
@GHS
@GHS, h_start_1, h_start_2, h_start_3, h_start_4, h_start_5, h_start_6,
h_start_7, h_start_8, h_start_9
@SHS, ch, h_start
@SHS, ch, h_start
h_start_1-9 / h_start: Horizontal start position
64 to 2900 (should be [the total number of horizontal dots – horizontal display
period] or less)
[Default]: depends on input signal
ch: Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
@GHS
@GHS,192,192,496,0,296,0,378,0,0
Getting the horizontal start position.
"0" is returned to channels without input signal.
@SHS,5,296
@SHS,5,296
Setting IN5 horizontal start position to "296".
@SHS,6,296
@ERR,3
If no signal is input, an error is returned.
Setting command is valid only for video signal except for 4K video signal.
If 4K video signal is input, only Getting commands are available.
MSD-72 series Command Guide
45