IDK MSD-72 Series Command Reference Manual page 103

@GBA / @SBA
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GPB / @SPB
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the bitmap that is output at startup.
Setting Command
example Response
Description OUT1: not output a bitmap at startup.
Remarks
Assigning input channel
@GBA, ch
@GBA, ch, bitmap_1, bitmap_2, bitmap_3, bitmap_4, bitmap_5, bitmap_6,
bitmap_7, bitmap_8, bitmap_9
@SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2･･･)
@SBA, ch_1, input_1, bitmap_1 (, ch_2, input_2, bitmap_2･･･)
ch: Output channel
1 = OUT1 to 4 = OUT4
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
bitmap_1-9: Bitmap assignment
0 = NONE [Default], 1 = Bitmap 1,
3 = Bitmap 3,
Only registered numbers can be specified.
input_1-9: Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
@GBA,1
@GBA,1,0,0,0,0,0,0,1,0,0
Getting the OUT1 bitmap assignment.
OUT1: bitmap 1 to IN7,
@SBA,1,7,1
@SBA,1,7,1
Setting OUT1: Assigning bitmap 1 to IN7 (if IN7 is selected, bitmap 1 is output.)
－
Startup bitmap
@GPB
@GPB, out_1, out_2, out_3, out_4
@SPB, ch_1, out_1 (, ch_2, out_2･･･)
@SPB, ch_1, out_1 (, ch_2, out_2･･･)
out_1-4: Outputting bitmap image
0 = OFF [Default],
3 = Bitmap3 ON,
Only registered numbers can be specified.
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GPB
@GPB,0,0,1,1
Bitmap 1 is output to OUT3 and OUT4.
@SPB,1,0
@SPB,1,0
－
MSD-72 series Command Guide
2 = Bitmap 2,
4 = Bitmap 4
other input channels: no bitmap is assigned.
1 = Bitmap1 ON,
4 = Bitmap4 ON
2 = Bitmap2 ON,
103