IDK MSD-72 Series Command Reference Manual page 92

MSD-72 series Command Guide
@GTF / @STF
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
92
Blinking time of sink device power switch
@GTF, switch_1 (, switch_2･･･)
@GTF, switch_1, flash_1 (, switch_2, flash_2･･･)
@STF, switch_1, flash_1 (, switch_2, flash_2･･･)
@STF, switch_1, flash_1 (, switch_2, flash_2･･･)
switch_1-13: Switch type
0 = All switches, 1 = COMMAND A to 9 = COMMAND I
10 = DISPLAY1 POWER to 13 = DISPLAY4 POWER
flash_1-13: Blinking time
-1 = Blinks during control command execution,
0 = Not blink,
1 to 1000 = Blinks for 1 second to 1000 seconds
[Default] COMMAND A to COMMAND I = 0,
DISPLAY1 POWER to DISPLAY4 POWER = -1
@GTF,1
@GTF,1,-1
Getting blinking time of COMMAND A.
The switch will be blinked while control command is being executed.
@STF,1,5
@STF,1,5
Setting COMMAND A to blink 5 seconds after control command execution starts.
－