IDK MSD-72 Series Command Reference Manual page 64

MSD-72 series Command Guide
@GSF / @SSF
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting sampling frequency settings.
Setting Command
example Response
Description Setting OUT1 sampling frequency to 48 kHz.
Remarks
@GFD
Getting Command
Response
Parameter
Getting Command
example Response
Description Getting the actual sampling frequency.
Remarks
64
Sampling frequency
@GSF
@GSF, frequency_1, frequency_2, frequency_3, frequency_4
@SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
@SSF, ch_1, frequency_1 (, ch_2, frequency_2･･･)
frequency_1-4: Sampling frequency
0 = AUTO [Default],
3 = 48 kHz,
6 = 192 kHz
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GSF
@GSF,0,0,2,2
OUT1 and OUT2: AUTO, OUT3 and OUT4: 32 kHz
@SSF,1,3
@SSF,1,3
－
Actual sampling frequency
@GFD
@GFD, frequency_1, frequency_2, frequency_3, frequency_4
frequency_1-4: Sampling frequency
1 = 32 kHz, 2 = 44.1 kHz,
4 = 88.2 kHz, 5 = 96 kHz,
@GFD
@GFD,5,5,3,3
OUT1 and OUT2: 96 kHz, OUT3 and OUT4: 48 kHz
"@GSF / @SSF" is set to "AUTO", the sampling frequency that is output actually
is returned. If it is set to value other than "AUTO", the set sampling frequency is
returned.
1 = 32 kHz, 2 = 44.1 kHz,
4 = 88.2 kHz, 5 = 96 kHz,
3 = 48 kHz,
6 = 192 kHz