IDK MSD-72 Series Command Reference Manual page 76

MSD-72 series Command Guide
@GSB / @SSB
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set subnet mask of the MSD.
Setting Command
example Response
Description Setting subnet mask to 255.255.192.0 (=18 bit).
Remarks
@GGW / @SGW
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting the set gateway address.
Setting Command
example Response
Description Setting gateway address to 192.168.1.254
Remarks
76
Subnet mask
@GSB
@GSB, unit_1, unit_2, unit_3, unit_4
@SSB, unit_1, unit_2, unit_3, unit_4
@SSB, unit_1, unit_2, unit_3, unit_4
unit_1: Upper bit of the subnet mask to unit_4: lower bit of the subnet mask
0 to 255 = 8 bit (Decimal notation) [Default] 255.255.255.0
@GSB
@GSB,255,255,192,0
Subnet mask: 255.255.192.0 ( = 18 bit)
@SSB,255,255,192,0
@SSB,255,255,192,0
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD
settings.
Gateway address
@GGW
@GGW, unit_1, unit_2, unit_3, unit_4
@SGW, unit_1, unit_2, unit_3, unit_4
@SGW, unit_1, unit_2, unit_3, unit_4
unit_1: Upper bit of the gateway address to unit_4: lower bit of the gateway
address
0 to 255 = 8 bit (Decimal notation) [Default] 192.168.1.200
@GGW
@GGW,192,168,1,254
Gateway address: 192.168.1.254
@SGW,192,168,1,254
@SGW,192,168,1,254
If IP address or RS-232C communication setting is changed, the communication
may be disabled. Change the environmental settings based on the MSD
settings.