IDK MSD-72 Series Command Reference Manual page 97

@GCA / @ECA
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@RPM
Setting Command
Response
Parameter
Setting Command
example Response
Description
Remarks
Editing crosspoint memory (Setting audio channel)
@GCA, memory
@GCA, memory, a_1, a_2, a_3, a_4, name
@ECA, memory, a_1, a_2, a_3, a_4
@ECA, memory, a_1, a_2, a_3, a_4
memory: Crosspoint memory
1 to 9
a_1-4: Audio channel
-1 = Not controlled [Default], 0 = OFF, 1 = IN1 to 9 = IN9
name: Memory name
Up to 10 characters using 20 to 7D from ASCII codes. [Default] 20 (space)
@GCA,2
@GCA,2,3,3,1,1,PATTERN2
Getting audio channel of crosspoint memory 2.
OUT1 and OUT2: IN3, OUT3 and OUT4: IN1 are saved with the name of
"PATTERN2"
@ECA,2,1,2,3,4
@ECA,2,1,2,3,4
When crosspoint memory 2 is loaded, outputs are set as follows:
OUT1: IN1, OUT2: IN2, OUT3: IN3, OUT4: IN4
Nothing is saved in the memory by factory default, the state is "-1" (Not
controlled). If you save only video (@SCV) at the first saving of crosspoint
settings, "-1" (Not controlled) is returned to unsaved audio and video.
Loading all settings
@RPM, preset
@RPM, preset
preset: Preset memory
1 to 8
@RPM,3
@RPM,3
Loading preset memory 3.
Once preset memory is loaded, all settings of video and audio I/O except for
some environmental settings will be updated.
MSD-72 series Command Guide
97