IDK MSD-72 Series Command Reference Manual page 47

@GVS / @SVS
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Setting Command
example Response
Description
Remarks
Vertical start position
@GVS
@GVS, v_start_1, v_start_2, v_start_3, v_start_4, v_start_5, v_start_6,
v_start_7, v_start_8, v_start_9
@SVS, ch, v_start
@SVS, ch, v_start
v_start_1-9 / v_start: Vertical start position
10 to 2048 (should be [the total number of vertical lines – vertical display
period] or less)
[Default]: depends on input signal
ch: Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
@GVS
@GVS,40,0,40,40,35,0,24,0,0
Getting the vertical start position
"0" is returned to channels without input signal.
@SVS,5,35
@SVS,5,35
Setting IN5 vertical start position to "35".
@SVS,6,35
@ERR,3
If no signal is input, an error is returned.
Setting commands: valid only for video signal except for 4K video signal.
If 4K video signal is input, only getting commands are valid.
MSD-72 series Command Guide
47