IDK MSD-72 Series Command Reference Manual page 56

MSD-72 series Command Guide
@HAU
Setting Command
Response
Parameter
Setting Command
example Response
Description Setting OUT1 to re-encrypt HDCP.
Remarks
@GAU / @SAU
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
56
HDCP re-encryption
@HAU, ch_1 (, ch_2･･･)
@HAU, ch_1 (, ch_2･･･)
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@HAU,1
@HAU,1
－
Priority of input channel automatic switching (OFF to ON)
@GAU, out
@GAU, out, in1_priority, in2_priority, in3_priority, in4_priority, in5_priority,
in6_priority, in7_priority, in8_priority, in9_priority
@SAU, out_1, in1_priority, in2_priority･･･, in9_priority (, out_2, in1_priority･･･)
@SAU, out_1, in1_priority, in2_priority･･･, in9_priority (, out_2, in1_priority･･･)
out, out_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
in1_priority-in9_priority: Priority
0 = OFF, 1 = Priority (high) to 9 = priority (low)
@GAU,1
@GAU,1,1,2,3,4,5,6,7,8,9
Getting the set priority of OUT1's automatic switching.
IN1>IN2>･･･>IN9
@SAU,1,9,8,7,6,5,4,3,2,1
@SAU,1,9,8,7,6,5,4,3,2,1
Setting the priority of OUT1's automatic switching to IN9>IN8>･･･>IN1.
－