IDK MSD-72 Series Command Reference Manual page 40

MSD-72 series Command Guide
@GHE / @SHE
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GAI / @SAI
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description Getting signal type of analog input.
Setting Command
example Response
Description Setting the signal type of IN8 and IN9 to YPbPr.
Remarks
40
HDCP input enabled/disabled
@GHE
@GHE, hdcp_1, hdcp_2, hdcp_3, hdcp_4, hdcp_5, hdcp_6, hdcp_7, hdcp_8,
hdcp_9
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
@SHE, ch_1, hdcp_1 (, ch_2, hdcp_2･･･)
hdcp_1-9: HDCP input enabled/disabled
0 = DISABLE, 1 = HDCP 1.4, 2 = HDCP 2.2
[Default] HDCP 2.2 [IN1 to IN3], HDCP 1.4 [IN4 to IN9]
ch_1-9: Input channel
0 = All digital inputs, 1 = IN1 to 9 = IN9
@GHE
@GHE,1,1,0,1,1,1,1,1,1
Getting HDCP input enabled/disabled.
IN3: disables HDCP input, other input channels: enables HDCP 1.4 input
@SHE,1,0
@SHE,1,0
Setting IN1 HDCP input to be disabled.
These commands are only for digital input.
IN8 and IN9 are available only if "1" (Digital signal). is selected for "@GIN /
@SIN". If "0" (Analog signal) is selected, "-1" is returned.
Analog input type
@GAI
@GAI, type_1, type_2
@SAI, ch_1, type_1 (, ch_2, type_2)
@SAI, ch_1, type_1 (, ch_2, type_2)
type_1-2: Signal type
0 = AUTO [Default],
3 = VIDEO AUTO,
ch_1-2: Input channel
0 = All analog inputs, 8 = IN8, 9 = IN9
@GAI
@GAI,0,2
IN8: AUTO, IN9: YPbPr
@SAI,0,2
@SAI,0,2
These commands are only for analog input.
IN8 and IN9 are available only if "0" (Analog signal) is selected for "@GIN /
@SIN". If "1" (Digital signal) is selected, "-1" is returned.
1 = RGB, 2 = YPbPr,
4 = VIDEO, 5 = Y/C