IDK MSD-72 Series Command Reference Manual page 72

MSD-72 series Command Guide
@GSP / @SSP The number of speakers
Getting Command @GSP, ch
Response @GSP, ch, number, speaker_1 (, speaker_2･･･)
Setting Command @SSP, ch, number (, speaker_1, speaker_2･･･)
Response @SSP, ch, number (, speaker_1, speaker_2･･･)
Parameter ch: Input channel
number: The number of speakers
speaker_1-8: Speaker configuration
Getting commands:: the number of speakers and which speakers will be used is
returned.
Setting commands:: if you do not specify the speaker configuration, the following
configuration will be applied depending on the set number of speakers.
For speaker configurations: the number and total number of speakers (speaker_1-8)
do not match, the number is set automatically based on the setting of speaker_1-8.
In case the number exceeds the settable range, an error is returned.
72
0 = All digital inputs (for setting only), 1 = IN1 to 9 = IN9
1 to 8 [Default] 2
0 = Front Left / Right [Default],
2 = Front Center,
4 = Rear Center,
6 = Rear Left / Right Center,
8 = Front Left / Right High,
10 = Front Center High
number
0 1 2
1 OFF OFF ON
2 ON OFF OFF
3
ON ON OFF
4
ON ON ON
5
ON ON OFF
6
ON ON ON
7
ON ON ON
8
ON ON ON
1 = Low Frequency Effect,
3 = Rear Left / Right,
5 = Front Left / Right Center,
7 = Front Left / Right Wide,
9 = Top Center,
speaker
3 4 5 6
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
ON OFF OFF OFF
ON OFF OFF OFF
ON ON OFF OFF
ON OFF OFF ON
7 8 9 10
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF
OFF OFF OFF OFF