IDK MSD-72 Series Command Reference Manual page 31

@GOM / @SOM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@OAS
Setting Command
Response
Parameter
Setting Command
example Response
Description Initializing the following settings in order to display OUT1 output images on the
Remarks
Output masking
@GOM, ch
@GOM, ch, left, right, top, bottom
@SOM, ch, left, right, top, bottom
@SOM, ch, left, right, top, bottom
ch: Output channel
1 = OUT1 to 4 = OUT4
left: Left side masking
Horizontal output position (0 or larger) to right side masking [Default]: 0
right: Right side masking
Left side masking to horizontal output position +horizontal output size
(horizontal output resolution or smaller) [Default]: Horizontal output
resolution
top: Top side masking
Vertical output position (0 or larger) to bottom side masking [Default]: 0
bottom: Bottom side masking
Bottom side masking to vertical output position +vertical output size (vertical
output resolution or smaller) [Default]: Vertical output resolution
@GOM,1
@GOM,1,0,1920,0,1080
Getting the set OUT1 output masking.
Left: 0, right: 1920, top: 0, bottom: 1080
@SOM,1,0,1920,0,1080
@SOM,1,0,1920,0,1080
Setting OUT1 output masking to 0 for left, 1920 for right, 0 for top, and 1080 for
bottom.
－
Output automatic sizing
@OAS, ch_1 (, ch_2･･･)
@OAS, ch_1 (, ch_2･･･)
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@OAS,1
@OAS,1
full screen:
position
@GOP / @SOP Output
size
@GOS / @SOS Output
masking
@GOM / @SOM Output
－
MSD-72 series Command Guide
31