IDK MSD-72 Series Command Reference Manual page 24

MSD-72 series Command Guide
@GUM / @SUM
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
@GAP / @SAP
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
24
Aspect ratio of sink device
@GUM
@GUM, aspect_1, aspect_2, aspect_3, aspect_4
@SUM, ch_1, aspect_1 (, ch_2, aspect_2･･･)
@SUM, ch_1, aspect_1 (, ch_2, aspect_2･･･)
aspect_1-4: Aspect ratio of sink device
0 = RESOLUTION [Default],
3 = 5: 3,
6 = 256: 135
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GUM
@GUM,4,4,5,5
Getting the set aspect ratio of the sink device.
OUT1 and OUT2: 16: 9, OUT3 and OUT4: 16: 10
@SUM,1,4
@SUM,1,4
Setting OUT1 to 16: 9.
－
Aspect ratio
@GAP
@GAP, aspect_1, aspect_2, aspect_3, aspect_4, aspect_5, aspect_6,
aspect_7, aspect_8, aspect_9
@SAP, ch_1, aspect_1 (, ch_2, aspect_2･･･)
@SAP, ch_1, aspect_1 (, ch_2, aspect_2･･･)
aspect_1-9: Aspect ratio of input signal
0 = AUTO-1 [Default],
2 = 4: 3,
5 = 16: 9 LETTER BOX,
8 = 14: 9 SIDE PANEL,
ch_1-9: Input channel
0 = All inputs, 1 = IN1 to 9 = IN9
@GAP
@GAP,0,0,2,0,0,0,0,0,0
Getting the set aspect ratio.
IN3: 4: 3 other inputs: AUTO-1
@SAP,7,2
@SAP,7,2
Setting IN7 to 4: 3.
－
1 = 4: 3,
4 = 16: 9,
1 = AUTO-2,
3 = 16: 9,
6 = 14: 9 LETTER BOX,
9 = FULL,
2 = 5: 4,
5 = 16: 10,
4 = 14: 9,
7 = 4: 3 SIDE PANEL,
10 = THROUGH