IDK MSD-72 Series Command Reference Manual page 66

MSD-72 series Command Guide
@GAT / @SAT
Getting Command
Response
Setting Command
Response
Parameter
Getting Command
example Response
Description
Setting Command
example Response
Description
Remarks
66
Test tone
@GAT
@GAT, tone_1, speaker_1, tone_2, speaker_2, tone_3, speaker_3, tone_4,
speaker_4
@SAT, ch_1, tone_1, speaker_1 (, ch_2, tone_2, speaker_2･･･)
@SAT, ch_1, tone_1, speaker_1 (, ch_2, tone_2, speaker_2･･･)
tone_1-4: Test tone
0 = OFF [Default], 1 = 1 kHz, 2 = 400 Hz
speaker_1-4: Speaker
0 = ALL [Default],
2 = REAR L/R,
4 = FRONT LEFT,
6 = LOW FREQUENCY EFFECT,
8 = REAR LEFT,
10 = REAR LEFT CENTER,
ch_1-4: Output channel
0 = All outputs, 1 = OUT1 to 4 = OUT4
@GAT
@GAT,2,1,2,1,0,0,0,0
Getting the set test tone output
OUT1 and OUT2: outputs test tone (400 Hz) to FRONT L/R.
OUT3 and OUT4: not output test tone.
@SAT,1,1,0
@SAT,1,1,0
Setting OUT1 to output test tone (1k Hz) to all speakers.
－
1 = FRONT L/R,
3 = REAR L/R CENTER,
5 = FRONT RIGHT,
7 = FRONT CENTER,
9 = REAR RIGHT,
11 = REAR RIGHT CENTER